در حال بارگذاری

در محصولات

    در آموزش ها

      در خدمات

        در سایر قسمتها



          ( امتیاز: 5 از 5، مشارکت کنندگان: 2 رای )

          CPU 1518-4 PN/DP MFP

          SIMATIC S7-1500, CPU 1518-4 PN/DP MFP, inclusive C/C++ Runtime and OPC UA Runtime license working memory 4 MB for program and 20 MB for data, 1. interface: PROFINET IRT with 2 port switch, 2. interface: PROFINET RT, 3. interface: Ethernet, 4. interface: PROFIBUS, 1 ns bit-performance, SIMATIC memory card (min. 2 GB) necessary

          Product Features:
          • Programmable with STEP 7 Professional, V15 and higher
          • SIMATIC ODK 1500S for C/C++ programming
          • SIMATIC Target 1500S or Simulink for the integration of complex Simulink models

          6ES7518-4AX00-1AC0 Introduction:

          Overview 6ES7518-4AX00-1AC0

          • The CPU with a large program and data memory in the S7-1500 controller product range for applications with high requirements regarding program scope and networking.
          • Extremely high processing speed for binary and floating-point arithmetic
          • For cross-industry automation tasks in series machines, special machines and plant constructtion
          • C/C++ functions can be called and executed in the CPU Runtime
          • In parallel to the CPU Runtime, there is an additional C/C++ Runtime, in which call-independent, i.e. stand-alone, C/C++ applications can be executed.
          • Used as central controller in production lines with central and distributed I/O
          • PROFINET IO IRT interface with 2-port switch
          • PROFINET IO controller for operating distributed I/O on PROFINET
          • PROFINET I-device for connecting the CPU as an intelligent PROFINET device under a SIMATIC or non-Siemens PROFINET IO controller
          • Two additional PROFINET interfaces with separate IP address; for network separation. The PROFINET interface X2 can be used for connecting additional PROFINET IO RT devices or for fast communication as an I-device. The PROFINET interface X3 facilitates data transfer at a speeed of 1 Gbps.
          • PROFIBUS DP master interface
          • OPC UA server and client as runtime option for the easy connection of SIMATIC S7-1500 to third-party devices/systems with the functions:
            OPC UA Data Access
            OPC UA Security
            OPC UA Methods Call
            Support of OPC UA Companion specifications.
          • Central and distributed isochronous mode on PROFIBUS and PROFINET
          • Integrated motion control functionalities for controlling speed-controlled and positioning axes, support for external encoders, cams/cam tracks and probes
          • Integrated web server for diagnostics with the option of creating user-defined web pages

          Multi-functional platform 6ES7518-4AX00-1AC0

          With the multi-functional platform (MFP), more functionality can be accomodated in a module. The computing power of the CPU 1518-4 PN/DP MFP allows the merging of prevously separate applications on a common platform while continuing to meet the high S7-1500 demands with regard to maintenance and ruggedness.
          This means that, in addition to the control function, it is also possible typical PC applications on the multi-functional platform, e.g. tasks that:

          • require high-level language programming.
          • are developed based on models, or
          • have to be sloved via databases.

          Thus, in addition to the option of running C/C++ code in the standard STEP 7 program, the CPU 1518-4 PN/DP MFP multi-functional platform provides an additional second independent runtime environment in order to execute C/C++ applications in parallel to the STEP 7 program if required.
          Control-independent applications, e.g. protocol converters, database applications and others, can be created in C/C++ This simplifies the creation or reuse of customer-specific, high-level language applications.
          The CPU 1518-4 PN/DP MFP has the quantity structure and functionality of a CPU 1518-4 PN/DP with regard to the control unit. In addition to the user program created with STEP 7 in the TIA Portal, C/C++ functions formulated via the SIMATIC ODK 1500S can be integrated into the standard user program. By using SIMATIC ODK 1500S (ODK-Open Development Kit), higher-level programming language mechanisms such as object orientation, can also be utilized. Furthermore, with the SIMATIC Target 1500S engineering package for Simulink, it is also possible to integrated complex Simulink models to take advantage of the model-based development using MATLAB and Simulink.

          SIMATIC Memory Card required for operation of the CPU

          Design 6ES7518-4AX00-1AC0

          The CPU 1518-4 PN/DP MFP features:

          • A powerful processor:
            The CPU achieves command execution times as low as 1 ns per binary instruction.
          • An extensive work memory:
            4 MB for program, 20 MB for data, 50 MB for CPU function library (the “CPU function library in the CPU Runtime” refers to the C/C++ code that runs synchronously in the PLC Runtime), 500 MB for C/C++ runtime application
          • SIMATIC Memory Cards ( at least 2 GB) as load memory permit additional functions such as data log and archives
          • Flexible expansion capability:
            single-tier configuration with max. 32 modules (CPU + 31 modules)
          • Display featuring:
            Overview information
            Date and time setting
            Selection of operating mode
            CPU reset to factory settings
            Project backup and restoration
            Disabling/enabling of display
            Enabling of protection levels
            Additional functions

          6ES7518-4AX00-1AC0 Technical Information's:

          SIMATIC S7-1500, CPU 1518-4 PN/DP MFP, inclusive C/C++ Runtime and OPC UA Runtime license working memory 4 MB for program and 20 MB for data, 1. interface: PROFINET IRT with 2 port switch, 2. interface: PROFINET RT, 3. interface: Ethernet, 4. interface: PROFIBUS, 1 ns bit-performance, SIMATIC memory card (min. 2 GB) necessary

          Technical Specifications

          • General Information:
          • CPU 1518-4 PN/DP MFPProduct type designation
          • FS01HW functional status
          • V2.6Firmware version
          • Product Function:
          • Yes; I&M0 to I&M3I&M data
          • Engineering With:
          • V15.1 (FW V2.6)/V15 (FW V2.5) or higherSTEP 7 TIA Portal configurable/integrated as of version
          • Configuration Control:
          • Yesvia dataset
          • Display:
          • 6.1 cmScreen diagonal [cm]
          • Control Elements:
          • 6Number of keys
          • 1Mode buttons
          • Supply Voltage:
          • 24 V DCType of supply voltage
          • 19.2 Vpermissible range, lower limit (DC)
          • 28.8 Vpermissible range, upper limit (DC)
          • YesReverse polarity protection
          • Mains Buffering:
          • 5 msMain/voltage failure stored energy time
          • 1/sRepeat rate, min
          • Input Current:
          • 1.7 ACurrent consumption (rated value)
          • 2 ACurrent consumption, max
          • 2.4 A; Rated valueInrush current, max
          • Power:
          • 12 WInfeed powerbto the backplane bus
          • 35 WPower consumption from the backplane bus (balanced)
          • Power Loss:
          • 29 WPower loss, typ
          • Memory:
          • 1Number of slots for SIMATIC memory card
          • YesSIMATIC memory card required
          • Work Memory:
          • 4 Mbyteintegrated (for program)
          • 20 Mbyteintegrated (for data)
          • 50 Mbyte; Note; the"CPU fumction library of the CPU" are C/C++ blocks for the user program that were created using the SIMATIC ODK 1500S or Target 1500S.intgrated (for CPU function library of CPU Runtime)
          • Working Memory For Additional Functions:
          • 512 MbyteIntegrated (for C/C++ Runtime application)
          • Load Memory:
          • 32 Gbyte; The memory card must have at least 2 GB of space on itPlug-in (SIMATIC Memory Card), max
          • Backup:
          • Yesmaintenance-free
          • Address Arrea:
          • 16 384; max. number of modules/submodulesNumber of IO modules
          • I/o Adress Area:
          • 32 kbyte; All inputs are in the process imageInputs
          • 32 kbyte; All outputs are in the process imageOutputs
          • Per Integrated Io Subsystem:
          • 16 kbyte; 16 KB via the integrated PROFINET IO interface X1, 8 KB via the integrated PROFINET IO interface X2 and via the integrated PROFIBUS DP interfaceInputs (volume)
          • 16 kbyte; 16 KB via the integrated PROFINET IO interface X1, 8 KB via the integrated PROFINET IO interface X2 and via the integrated PROFIBUS DP interfaceOutputs (volume)
          • Per Cm/cp:
          • 8 kbyteInputs (volume)
          • 8 kbyteOutputs (volume)
          • Hardware Configuration:
          • 64; A dsitributed I/O system is characterized not only by the integration of distributed I/O via PROFINET or PROFIBUS communication modules, but also by the connection of I/O via AS-i master modules or links (e.g. IE/PB-Link)Number of distributed IO systems
          • Interface Types:
          • 2Number of ports
          • Yesintegrated switch
          • Yes;X1RJ45 (Ethernet)
          • Protocols:
          • Yes; IPv4IP protocol
          • YesPROFINET IO Controller
          • YesPROFINET IO Device
          • YesSIMATIC communication
          • YesOpen IE communication
          • YesWeb server
          • Yes; MRP Automanager according to IEC 62439-2 Edition 2.0Media redundancy
          • Programming Language:
          • YesLAD
          • YesFBD
          • YesSTL
          • YesSCL
          • YesGRAPH

          در صورت تمایل شما هم می توانید نظر خود را در مورد 6ES7518-4AX00-1AC0 کنید.

          دیدگاه خود را بیان کنید:

          جدید ترین محصولات


          CPU 1517H-3 PN

          Producer: SIEMENS


          CPU 1517H-3 PN

          Producer: SIEMENS


          CPU 1515R-2 PN

          Producer: SIEMENS


          CPU 1513R-1 PN

          Producer: SIEMENS


          CPU 1518F-4 PN/DP MFP

          Producer: SIEMENS


          CPU 1518F-4 PN/DP

          Producer: SIEMENS


          Switch Amplifier

          Producer: Pepperl+Fuchs


          Switch Amplifier

          Producer: Pepperl+Fuchs
          Switch Amplifier KCD SR Ex.LB


          CPU 1517F-3 PN/DP

          Producer: SIEMENS


          CPU 1516F-3 PN/DP

          Producer: SIEMENS


          CPU 1515F-2 PN

          Producer: SIEMENS


          CPU 1513F-1 PN

          Producer: SIEMENS


          CPU 1511F-1 PN

          Producer: SIEMENS


          CPU 1512C-1 PN

          Producer: SIEMENS


          CPU 1511C-1 PN

          Producer: SIEMENS